PRODUCTS + APPLICATION

CONTACTS:

  • POAH has negotiated pricing with select manufacturers and wholesalers. When purchasing and installing new paint please contact the following representatives:

 

PRIME COAT

  • Sheetrock substrate: Sherwin Williams- ProMar 200 Zero VOC Latex Primer, B28W2600, at 4.0 mils wet, 1.5 mils dry.

  • Concrete/ concrete block substrate: Sherwin Williams- S-W PrepRite Block Filler, B25W25, at 100 to 200 sq. ft. per gal (2.4 to 4.9 sq. m per l).

  • Wood substrate: Sherwin Williams- PrepRite ProBlock Primer Sealer, B51-620 Series, at 4.0 mils wet, 1.4 mils dry

  • Metal substrate: Sherwin Williams- S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series, at 5.0 to 10 mils wet, 2.0 to 4.0 mils dry

TOP COAT

  • Units + Low Traffic Common Areas:

    • All Substrates, except metal:

      • Sherwin Williams- ProMar 200 Zero VOC Latex, B31-2600 Series, at 4.0 mils wet, 1.6 mils dry, per coat.

  • High Traffic Common Areas + Metal Substrates:

    • All elevator walls, handrails, and doors in common areas.

      • Sherwin Williams- Pro Industrial Waterbased Alkyd Urethane Enamel, B53-115- Series, at 1.4-1.7 dry, per coat.

 

PREPARATION:

  • Remove hardware, covers, plates, and similar items already in place that are removable and are not to be painted.

  • Clean substrates of substances that could impair bond of paints, including dust, dirt, oil, grease, and incompatible paints and encapsulates.

  • Using a damp sponge or cloth, wipe to remove the surface dirt and marks and any excess cleaner. For difficult stains, some scrubbing may be necessary.

  • Do not allow the cleaner to dry on the surface.

  • Review hazardous material O&M for locations of lead paint or asbestos-containing substrate. Any work on these surfaces must follow directions in O&M.

APPLICATION:

  • Apply paint in accordance with manufacturer's directions. Use applicators and techniques best suited for substrate and type of material being applied.

  • Apply paints only when temperature of surfaces to be painted and ambient air temperatures are between 50 and 95 deg F

  • Brush: Use a nylon/polyester brush.

  • Roller: Use a 3/8" - 3/4" nap synthetic cover.

  • Spray—Airless:

    • Pressure: 2000 psi

    • Tip: 017"-.021"